Below you'll find galleries of some of our work. We've tried to make each gallery highlight the range of our work, not just the biggest and most expensive projects.
We also try to share our most current projects on social media, check us out on Facebook and Twitter.
Select a category
or scroll down
Here are some quick shortcuts to popular things we do.
nwgi | NW Graphic Imaging
121 SW 4th Street
Corvallis, Oregon 97333
Monday - Friday 8:45 - 5:30pm
Partial wraps can have a full impact. nwgi can create a design and wrap to meet any budget!
Custom installation and accents on vehicles can also be done.
Have a custom vehicle, trailer or boat? We can install on almost anything!
Even Simple Graphics can have a great impact without breaking the bank.
PT Cruisers are notoriously hard to wrap with all the curves, but with the right films and installation expertise we can make it happen!
This is the third full wrap we've completed for Hope 107.9. The green fade to white works perfectly for a white truck.
A special project for OSU Baseball. This 12V kids ride-able wouldn't do in Corvallis with a Green and Yellow paint job. We both wrapped and painted this sweet ride. The kids drive it out to the mound to deliver baseballs before the game.
Large graphics are no problem. OSU Transit's bus line features a full "beaver tail" wrap in the back, with digitally printed buildings and graphics on the side.
A new box truck for Block 15 with full panel graphics.
Simple company graphics and fleet identification can be done quickly and at low cost.
OSU Campus Recycling's fleet of box trucks. Our wrap films are designed to go right over rivets like these.
We design, install and maintain the fleet graphics for CPD. Some vehicles feature reflective graphics as well.
This 20 foot banner was produced using our very durable 13oz banner material. It features a 1,000 x 1,000 denier material making it much harder to rip.
These sail banners are produced with a double sided fabric.
We do construction signs. From temporary low cost prints, to more durable long-term signs we can help with your project!
Custom Aluminum signs - we do that. All of CTS's bus stops are made by us with .063 aluminum with a digitally printed face with a protective over-laminate to provide years of service.
These captain banners were made to hang in OSU's Football office. We created and sewed pole pockets in the bottom and top so they would hang nicely.
Corrogated plastic signs. We can do small or large volume orders; single or double sided!
Another Sail banner. This one is 14' tall!
We sell ten different models of Sandwich Boards. This one is our largest and has 3' x 4' panels!
The Wind Sign II is very popular where there are high winds. The base can be filled with sand or water to add weight, and the springs provide flex so the graphic stays upright!
Our Standard 13oz banner material.
Double-Sided banners, custom sewing, with pole pockets? Yeah - we do that!
Custom 4' x 8' signs for a grocery store.
Signs & Banners
Don't want to pay for acid etching on your glass. Let us help by installing custom graphics including frosted vinyl to create a professional look or privacy.
Custom vinyl graphics were creating for this special event using a removable adhesive vinyl.
Large 1/2" Gator-board mounted prints can create a grand display. Each of these prints are 4' x 5'.
We can do one retractable display, or 200!
X-Stands are great for an easy set-up and take-down display.
The 16' long display was mounted to two pieces of 3/16" gatorboard.
We can produce and install custom laser-cut acrylic lettering for a very professional look.
These Mark Bric retractors look great. They are printed with our HP latex printer onto a durable synthetic polypropylene paper for durability and great colors.
Another retractor set-up for a trade show.
Create a splash by combining multiple displays into one large graphic.
We produced these X-Stands with our Banner Mesh vinyl banner material so it would let the wind through outside.
These X-Stands were produced with out very durable 13oz vinyl banner material.
3M's IJ180-cv3 wrap film with lam was used to create this custom trunk for the OSU equipment room.
These 4' x 6' displays are made with 3mm Sintra.
Wall film was used to create this wall graphic on cinderblock.
Custom cut Beaver graphics for the OSU Football team. Each one is printed on waterproof adhesive vinyl with lamination to protect from scuffing.
We can wrap more than vehicles. This Stahlbush Island Farms freezer case was wrapped by us on location.
Need one sticker? Need thousands? We can do it!
We don't just mount on Foam-core. This material is called Bio-Board and is made from 67% recycled material and is 100% recyclable. It's made here in Oregon too!
We can print onto woven polyester canvas and stretch it as well for art, family photos, or your brand!
We do more than just huge prints and wraps. We can help with small format print projects as well like business cards, postcards, booklets, flyers, and more!
Our decals can not only be printed and laminated, but also custom cut using our Graphtec ARMS enabled cutter. This method provides industry leading accuracy for contour cutting.
More of our decals being printed...
These may look huge on the pallet but are only about 3". We can handle the small stuff too!
We design all the flavor graphics for Romano's Italian Soda, as well as bottle layouts.
We can do it all. We created the logo for Evergreen Valley Construction, produced the graphics and installed them on their vehicles and trailers.
We designed these custom graphics for OSU Women's Soccer for their loccer room.
We designed the look and brand for Synergy Security for their vehicles and print materials.
Designing the look of the Corvallis Police Departments fleet of graphics is really awesome. We layout the designs, produce and install the graphics, as well as maintain the fleet,
The Pastega Christmas Display is a fixture of Corvallis and has been for decades. When it moved to the Benton County Fairgrounds we got to design a lot of new graphics for them!
We created this custom logo for one of our clients from scratch,
We created this display in Reser Stadium to showcase great plays and players. Each print was reverse mounted on polished acrylic and aluminum stand-offs mounted each to the wall.
Creating stand up cutouts of Benny Beaver is one of the fun things we get to do! These one's were on 3mm DiBond panels to provide extra durability.
We produce these Point of Sale displays for 2 Towns Cider. They are made from corrugated plastic and feature a custom routed tree shape to give a third dimension to the display.
These two wall graphics inside the OSU Beaver store are printed on a wall graphic film. The graphic in the background is over 30 feet long!
We produced these graphics for a display case for Men's Basketball. They are actually on thin polystyrene panels adhered to the back so they can be changed out.
We're OSU's biggest fans! These huge fans are on the side-lines for the Beavs and we got to get them all dressed up with wrap film.
The Portland Timbers won the cup in 2015. To celebrate 2 Towns Ciderhouse, a Portland Timbers partner, had us create these awesome 3-D displays from corrugated plastic. RCTID!
We produced this huge Octopus for the Hatfield Marine Science Center. Each panel is made from perforated adhesive vinyl, so you can actually see through it from the inside looking out!
Over 600 individual graphics were placed on this wall for the Arnold Dining Center. The fork and spoon graphics were made from cut vinyl. The letters are laser cut from 1/4" Acrylic.
We created this quick bag prototype from a clients design so they could show buyers what their product would look like.
We applied wrap film to the new court for OSU Women's Volleyball. Thje Beaver logo, PAC-12 Logo, and Ralph Muller Court graphics are all produced on 3M's wrap film and applied to the custom made court.
Beaver Football Signing Day is always exciting. We created this stand up 8 foot by 8 foot display as a backdrop for the live video announcing the Beaver's new signings!
© 2020 nwgi | NW Graphic Imaging All rights reserved.